All Projects
Step-by-step STEM guides for every skill level
4 projects found for "battery"
⚡ ElectronicsAdvanced1 hr laser + assembly
Laser-Cut 3S Servo Tester with ESP32-C3 and OLED
Build a battery-powered tester for up to six hobby servos, with an OLED, a rotary knob and a charging socket, all in an engraved plywood case cut from one 300 x 300 mm sheet.
#ESP32#Servo#Laser Cutting
⚡ ElectronicsIntermediate1.25 hrs laser + 4 hrs build
Pentagon Mood Lamp: Five Colours, an ESP32 and Its Own Remote
A laser-cut pentagon lantern with one colour per side. An ESP32-C3 dims five 12 V COB LEDs through 2N2222 transistors, controlled from a five-button remote you build yourself or from your phone. Cut files, firmware and an assembly guide included.
#ESP32#mood lamp#laser cut
🧲 PhysicsBeginner1.5 hrs laser + 2 hrs build
HydroArm: a Water-Powered Robot Arm with Syringes
A laser-cut robot arm that runs on water: push four syringes on a control panel and the arm turns, lifts, reaches and grabs. No batteries, motors, wires or screws. For Primary 1 to 6.
#laser cut#hydraulics#syringes
🧲 PhysicsBeginner1 hr laser + 40 min build
Crank-a-Light: Make Light with Your Arm and Wooden Gears
Turn a wooden crank, a 75:1 wooden gearbox spins a small motor backwards as a generator, and two LEDs light up: red one way, yellow the other. No batteries and no soldering by pupils. For Primary 1 to 6.
#laser cut#gears#generator